Cookie Img
Back to top
Home » Products » Scaffolding Products » Cup Lock Systems

Cup Lock Systems

Cup Lock Systems
Cup Lock Systems
Product Code : SE 12
Product Description

With the assistance of our team of professionals, we are engaged in providing an excellent quality Cup Lock Systems. The offered cup lock systems are manufactured using supreme class material and modern technology in sync with the norms of market. These cup lock systems are quite versatile in its use and can be seen in construction. These cup lock systems are utilized in construction industries for connecting four horizontal pipes to a signal vertical one.


  • Highly durable
  • Long lasting
  • Perfect in dimension
  • Fine finishing

Made out of 40 NB ' B ' class confirming to IS 1161/1239 cups are provided at 500 m.m.c/c in the standard product. Cups at 1000mm. c/c is optional.

Erection Procedure :- Before commencing the erection of any cuplock scaffold, care should be taken to see that the ground is suitable. on soft or made up ground, the scaffold should be erected on timber sole planks. Bricks and blocks should not be used. Always commence erection at the highest point of ground. This will make leveling easier as the scaffolding progresses horizontally.

Lay out ledgers and verticals for the first bay in approximates positions. Then insert an adjustable jack into each pair of vertical.

Connect the verticals with the ledger in the lowest cup joint, by inserting the cups. Leavel the verticals as shown.

With one man still holding the first pair of verticals, the second man inserts a jack into the third vertical and connect in to the first pair with a ledger. The upper cups can be dropped temporarily into the locking position. The structure is self supporting and the fourth vertical can now be connected by a further ledger and the bay leveled as shown.

The first bay of cuplock is completed by locating the upper ledgers. It is now a simple matter to extend the scaffold structure by connecting ledgers.

Made out of 40 NB 'B' class confirming to IS 1161/1239 forged end blades are welded to both ends of tubes.

Verticals Horizontals
Sizes Wt. ( Approx ) Sizes Wt. ( Approx )
0.70 mts. 3.700 kgs. M.S.Ledger 0.50 mts. 1.800 kgs.
1.00 mts. 5.350 kgs. M.S.Ledger 1 mts. 3.500 kgs.
1.50 mts. 7.200 kgs. M.S.Ledger 1.5 mts. 5.100 kgs.
1.80 mts. 8.100 kgs. M.S.Ledger 2 mts. 7.050 kgs.
2.00 mts. 9.900 kgs
2.50 mts. 11.750 kgs
3.00 mts. 13.500 kgs
Main Lift Vertical Loading
0.50 mts. 1.800 kgs.
1.00 mts. 3.500 kgs.
1.50 mts. 5.100 kgs.
2.00 mts.

7.050 kgs.


We are only dealing in Maharashtra, Pune & Goa.

"We are dealing in Construction Industry and looking for inquiries from the clients based in Maharashtra & Goa only."